All posts by Fanny Griesmer
Solving TEAM Problem 7 with the AC/DC Module
Have you been searching for a software that can solve TEAM Problem 7? Look no more: You can solve the problem with the AC/DC Module and COMSOL Multiphysics®.
How to Model Stresses and Strains in COMSOL Multiphysics
Want to learn how to model stresses and strains in COMSOL Multiphysics®? This blog post contains an embedded video that will demonstrate the process in under 5 minutes!
AMPHOS 21 on Simulating Carbon Sequestration
Carbon dioxide sequestration is a proposed solution to releasing carbon dioxide into the atmosphere that involves storing the CO2 in geological formations. AMPHOS 21 models this process.
Video: Mechanical Analysis Accelerates Time-to-Market
“The more precise and explicit your simulations of mechanical parts and assemblies are, the less chance for product failure and delayed manufacturing runs.” Learn more in this blog post & video.
Using MATLAB® Functions in Your COMSOL Multiphysics® Models
Did you know that you can use MATLAB® functions in your COMSOL Multiphysics® models? Get a demonstration in a tutorial video (transcript included) here >>
Where Can I Find COMSOL Multiphysics Tutorial Models?
There are 2 ways you can find COMSOL’s tutorial models: The online Application Gallery includes downloadable resources and the Application Library makes models available directly in the software.
Optimizing Mach-Zehnder Modulator Designs with COMSOL Software
3 design requirements for a Mach–Zehnder modulator: It must produce low loss, give a 50/50 split of power through the 2 output arms, and be used as a spatial switch. See how simulation can help.
Modeling a Branch Line Coupler
A branch line coupler is made up of 2 sets of coupled ports with a phase difference of 90° between them. Power enters through 1 input port and is then divided equally between 2 output ports.