Geometry

Resolving Gaps and Intersections in Imported CAD Assemblies

Solution Number: 1314 Applies to: CAD Import Module, Design Module Versions: 6.2, 6.1, 6.0, 5.6

In CAD assemblies, small gaps or intersections between components are often expected, and some inaccuracies can even be unavoidable due to the complex nature of a design. When importing a CAD assembly file to set up a ...


Design Module License Checked out Directly when Starting 2D Drawings

Solution Number: 1280 Applies to: COMSOL Multiphysics, Design Module Versions: 5.5

For users of a floating-network license for COMSOL Multiphysics that includes the Design Module, a license key for the Design Module is checked out as soon as you draw something in a 2D geometry. This is the case even ...


Error: Please close the COMSOL window in SOLIDWORKS before synchronizing the geometry

Solution Number: 1279 Applies to: LiveLink for SOLIDWORKS Versions: 5.5

When I try to synchronize the geometry between COMSOL and SOLIDWORKS, the error message Please close the COMSOL window in SOLIDWORKS before synchronizing the geometry. is displayed. This error has been fixed in ...


The Usage of Form Union and Form Assembly

Solution Number: 1216 Versions: All versions

There is an option to Form Union or Form Assembly at the end of the Geometry sequence. What does this mean and when should I switch between them? The Geometry branch within the Model Builder consists of a sequence of ...


Error: Failed to Connect to Inventor LT

Solution Number: 1167 Versions: All versions

When I try to synchronize the geometry between COMSOL and Inventor LT, the error message Failed to connect to Inventor. Please make sure Inventor is running. is displayed. Inventor LT does not support third party ...


Using Symmetries in COMSOL Multiphysics

Solution Number: 1038 Versions: All versions

How do I take advantage of the symmetries in my COMSOL model? ##Using Symmetries to Reduce Model Size By using symmetries in a model you can reduce its size by one-half or more, making this an efficient tool for ...


Error: Failed to Connect to Solid Edge

Solution Number: 1160 Applies to: LiveLink for Solid Edge Versions: All versions

When I try to synchronize the geometry between COMSOL and Solid Edge, the error message Failed to connect to Solid Edge. Please make sure Solid Edge is running. is displayed, and the COMSOL Multiphysics tab in Solid ...


Error: Failed to Connect to Inventor

Solution Number: 1163 Versions: All versions

When I try to synchronize the geometry between COMSOL and Inventor, the error message Failed to connect to Inventor. Please make sure Inventor is running. is displayed. In addition, in the Inventor user interface, ...


Error: Failed to Connect to PTC Pro/ENGINEER

Solution Number: 1162 Versions: 6.1, 6.0, 5.6, 5.5, 5.4, 5.3a, 5.3, 5.2a, 5.2, 5.1, 5.0, 4.4, 4.3b, 4.3a, 4.3, 4.2a, 4.2, 4.1, 4.0a, 4.0

When I try to synchronize the geometry between COMSOL and PTC Pro/ENGINEER Wildfire 4.0, the error message Failed to connect to PTC Pro/ENGINEER. Please make sure PTC Pro/ENGINEER is running. is displayed. The ...


Parameter Selection Is Not Available in the PTC Pro/ENGINEER User Interface

Solution Number: 1159 Applies to: LiveLink for PTC Pro/ENGINEER Versions: 6.1, 6.0, 5.6, 5.5, 5.4, 5.3a, 5.3, 5.2a, 5.2, 5.1, 5.0, 4.4, 4.3b, 4.3a, 4.3, 4.2a, 4.2, 4.1, 4.0a, 4.0

The COMSOL menu and Parameter Selection are not available in the PTC Pro/ENGINEER (PTC Creo Elements/Pro) user interface, and parameter names are not synchronized to COMSOL. For parameter selection to work in PTC Pro ...


First
Previous
1–10 of 14