Per page:

Interfacing Blog Posts

Preconditioning of Surface-Mount Devices for Reliability Testing

May 20, 2024

Explore how modeling and simulation can be used to analyze the thermal stress and hygroscopic swelling of a surface-mount device through the 3 preconditioning stages.

Validating Transonic Flow Results with the ONERA-M6 Wing Model

March 30, 2023

When using simulation software, your models’ results should accurately reflect the real-world phenomena you are simulating. 1 way to check this is by using a validation model.

Combining Volumetric Conductor Models and Lumped Elements

February 27, 2023

With the AC/DC Module, it is possible to connect a full-fidelity volumetric conductor model to a lumped circuit element model. Learn how here.

A Practical Implementation of Multiphysics Topology Optimization

September 16, 2022

A guest blogger from GN Audio A/S introduces a multiphysics topology framework developed with the COMSOL Application Programming Interface and LiveLink™ for MATLAB®.

Modeling Graphene in High-Frequency Electromagnetics

June 15, 2022

Graphene exhibits a variety of interesting properties, including high elasticity and mechanical strength. In this blog post, we’ll explore how to model graphene in an electromagnetic simulation.

Offline Synchronization for the LiveLink™ for CAD Products

May 31, 2022

As of version 6.0, you can synchronize files between COMSOL Multiphysics® and a CAD software when they are installed on different computers.

FDA Benchmark: CFD Modeling of a Centrifugal Blood Pump

April 22, 2022

CFD modeling is increasingly being used in medical device development to analyze device safety and effectiveness, accelerate the development cycle, and reduce costs. See 1 example here.

How to Compute the Projected Area of a CAD File in COMSOL®

January 20, 2022

Learn about three approaches to computing the projected area of a CAD file and when to use each one.

1–8 of 79