Interfacing Blog Posts
Lidar for Autonomous Vehicles and Vacuum Cleaners
In the future, will self-driving cars be commonplace? Explore how ray tracing can be used to study the technology that enables them to be aware of their surroundings.
Modeling an Acoustic Trap: Thermoacoustic Streaming and Particle Tracing
Acoustic traps are used in a range of biomedical applications for manipulating cells and particles. See how an acoustic trap can be simulated in COMSOL Multiphysics® here.
Preconditioning of Surface-Mount Devices for Reliability Testing
Explore how modeling and simulation can be used to analyze the thermal stress and hygroscopic swelling of a surface-mount device through the 3 preconditioning stages.
Validating Transonic Flow Results with the ONERA-M6 Wing Model
When using simulation software, your models’ results should accurately reflect the real-world phenomena you are simulating. 1 way to check this is by using a validation model.
Combining Volumetric Conductor Models and Lumped Elements
With the AC/DC Module, it is possible to connect a full-fidelity volumetric conductor model to a lumped circuit element model. Learn how here.
A Practical Implementation of Multiphysics Topology Optimization
A guest blogger from GN Audio A/S introduces a multiphysics topology framework developed with the COMSOL Application Programming Interface and LiveLink™ for MATLAB®.
Modeling Graphene in High-Frequency Electromagnetics
Graphene exhibits a variety of interesting properties, including high elasticity and mechanical strength. In this blog post, we’ll explore how to model graphene in an electromagnetic simulation.
Offline Synchronization for the LiveLink™ for CAD Products
As of version 6.0, you can synchronize files between COMSOL Multiphysics® and a CAD software when they are installed on different computers.
FDA Benchmark: CFD Modeling of a Centrifugal Blood Pump
CFD modeling is increasingly being used in medical device development to analyze device safety and effectiveness, accelerate the development cycle, and reduce costs. See 1 example here.
How to Compute the Projected Area of a CAD File in COMSOL®
Learn about three approaches to computing the projected area of a CAD file and when to use each one.
The North Pole Uses Simulation to Help Santa Take Flight
Happy holidays! Guest blogger Winter Frost returns to discuss how simulation is being used at the North Pole to help Santa take flight.
Simulating the Pressure in an Ultrahigh Vacuum System
The ETpathfinder research facility in the Netherlands was built in anticipation of the proposed Einstein Telescope (ET), a third-generation observatory of gravitational waves.
How to Link COMSOL Graphics to Microsoft® PowerPoint®
Did you know that you can easily import, update, and replace model images from COMSOL Multiphysics® in your Microsoft® PowerPoint® presentations?
8 Uses of COMSOL Multiphysics® in the Biomedical Industry
Read about 8 real-world examples of how engineers and researchers in the biomedical industry are using simulation to advance their innovative designs.
New Method for Performing Topology Optimization of FSI Problems
Many topology optimization methods are only available for FSI problems within a purely academic scope. Enter the TOBS-GT algorithm for fluid-structure design…
How to Use the Sketch Tools in COMSOL® to Draw 2D Geometry
Did you know that you can interactively draw and edit geometry right within the Graphics window in COMSOL Multiphysics®? Learn how to use Sketch mode with step-by-step video demonstrations.
How to Create an App with CAD Import and Selections
What if you want to create an app with CAD import functionality and interactive selections, but you don’t know any programming? The Form Editor in the Application Builder lets you do just that.
Material Characterization by Means of Simulation
Carbon-based materials, such as synthetic specialty graphites, are found in many industries, including solar, semiconductor, car manufacturing, ceramics, and metallurgy.
How to Use Topology Optimization Results as Model Geometries
Oftentimes, topology optimization is not the last step in your design process. In fact, you can use the results from a topology optimization study as model geometries for your next analysis.
Developing a Silicon MEMS Chip for On-Demand DNA Synthesis
The development of genome editing tools like CRISPR-Cas9 has increased the demand for DNA synthesis technology. Researchers are creating a DNA synthesis platform to broaden horizons in the field.
Finding the Best Way to Make Crêpes with Fluid Dynamics Research
The recipe for the perfect crêpe calls for flour, eggs, milk, sugar, butter, and…simulation? Fluid dynamicists used simulation to solve the optimal coverage problem for crêpe making.
How to Refine and Adapt Imported Meshes
2 features for getting the most out of your imported meshes: 1. The Refine operation quickly reduces element size. 2. The Adapt operation modifies the element size via an expression.
Defeating Giant Movie Monsters Using Mathematical Modeling
The predator-prey equation can predict how we’d fare in a monster invasion, as well as real-world biology and ecology scenarios like shark overpopulation and tumor movement.
How to Automatically Remove Small Details in Your Model Geometry
Have you ever wished for an automatic way to remove small details in your model geometry that are causing an unnecessarily fine mesh or a poor mesh quality? Enter the Remove Details operation.