Per page:

Blog Posts Tagged Plasma Module

Control Current and Voltage Sources with the AC/DC Module

February 25, 2016

Did you know that you can use the Terminal boundary condition to dynamically switch between excitation types during a transient simulation? This is useful for modeling power supply, for example.

Calculating the Emission Spectra from Common Light Sources

January 14, 2016

We use COMSOL Multiphysics® to calculate the emission spectra of 4 common light sources: natural daylight, incandescent light bulbs, fluorescent light bulbs, and LED bulbs.

Thermodynamic Equilibrium of Plasmas

February 10, 2015

Are you interested in modeling plasmas with the COMSOL® software? Get an overview of the different plasma types and when to use each of the interfaces available in the Plasma Module.

Ion Temperature in Inductively Coupled Plasmas (ICPs)

October 22, 2014

When modeling plasmas, your choice of ion temperature can affect your model results. We discuss the theoretical reasons behind this phenomenon using an inductively coupled plasma example.

Electron Energy Distribution Function

August 4, 2014

The electron energy distribution function (EEDF) strongly influences the results of a plasma model. But what are some ways we can numerically describe the EEDF in the COMSOL® software?

Microwave Plasmas

December 11, 2013

Microwave plasmas, or wave-heated discharges, find applications in many industrial areas such as semiconductor processing, surface treatment, and the abatement of hazardous gases. This blog post describes the theoretical basis of the Microwave Plasma interface available in the Plasma Module.

Corona Discharge

February 6, 2013

In its natural state, air is a good insulator. However, if it’s adequately ionized, it can ultimately lead to “corona discharge”. What does that mean and why is it important? Let’s find out.

AltaSim Takes on Surface Plasmon Resonance Modeling

April 26, 2012

We’ve just got another finished article and layout back for COMSOL News and it looks as great as the others, but for different reasons. We usually ask a couple of our partners to write an article for COMSOL News to provide users with some more technical background to modeling. AltaSim Technologies, who are certified consultants and even run courses in COMSOL, have written an article about surface plasmon resonance.

9–16 of 16